Prestige Plastics

Product Collaboration:

How To Get High Quality Plastic Pipes In Pakistan?

Plumbing pipes are part of our everyday life. But getting and installing the plumbing pipes can be a bit overwhelming. There are so many different types of pipes to choose from. There are so many opinions for pipes in Pakistan and many piping companies in Pakistan. But instead of trusting blindly and risking the future of your house it is always better to do a bit of research so you know that if it is being done the right way.

Do Your Research:

The pipes that you choose must have some characteristics that are very important. You must consider the following factors before choosing a particular type of piping system in Pakistan for your project:

Check The Quality:

Quality of the pipe is the most important factor. Don’t just go before the price but also make sure that the quality is good. Check reviews on the manufacturer of the pipes. Prestige CPVC and HDPE quality pipes makes us one of the best plastic pipe suppliers in Pakistan.

Installation Method:

Installation is another very important factor to be concerned about while choosing the right pipe for your home or office. Pipes that are lightweight and easier to install are better because their transportation and installation takes lesser labour cost. Hence, they are pocket friendly along with the comfort.

Corrosion Resistant:

The pipes that you choose must be corrosion resistant. The pipes that are prone to corrosion get damaged over time and their lifetime is very short. Besides, they also contaminate the potable water being transported in it. Prestige CPVC pipes and fittings are resistant to corrosion and usually last a lifetime if not subject to any damage.

Medically Safe:

If potable water is to be transported through the plumbing system, it also must be ensured that the pipes are medically safe. A medically safe pipe must be lead free because lead is injurious to health. Plus the pipe should be bacterial resistant because bacteria can accumulate and form colonies in the pipe. Such pipes contaminate the potable water with bacteria that can cause very bad bacterial water borne diseases.


The pipe you are choosing should be durable as well. Pipes that are strong and have higher tensile strength last longer than other pipes. Pipes should not leak or burst in case of external or internal pressures. Durable pipes would last a long time.

You would need to do a bit of research about the different types of pipes in Pakistan and if they have the qualities mentioned above.

Know Your Needs

Before going into the practical phase and starting the proceedings, you should be crystal clear about what kind of plumbing system you need to be built. You also should know what your budget range is for the project. For example, you need a plumbing system to be built for a 8 marla house with 3 bathrooms, carrying both hot and cold water. This is your need and it is the requirement that you are going to put in front of the contractor. Your project type and need also determines what pipes you should be choosing. You should know your needs precisely, because you can only get something once you are clear about what you need.

Contact Pipe Suppliers in Pakistan

Now it is the time to contact the contractors and pipe suppliers. There are construction or plumbing companies in all of the cities. You can visit their office physically or you can talk to them over the phone. You basically have to tell them your needs and the requirements of your plumbing project. Then they would be able to tell an estimated time and cost of the project. You should at least contact 3 plumbing contractors or companies and see which are more trustable and which offer suits your interests and needs. A good plumbing company has a decent experience, good reviews and reputation, good work ethics, cheaper rates and availability. The plumbing contractor would also refer you to pipe suppliers as they both work hand to hand.

Get The Pipes in Pakistan

Once you have selected the contractor and pipe supplier, it is finally the time to get the job done. Pipe supplier would provide you pipes and fittings according to your project needs and transport them to the site. CPVC pipes in Pakistan and HDPE pipes in Pakistan are the best pipes in Pakistan that could be used for a wide range of applications. The contractor would be doing the installation for you. Pipe installation time depends upon your project but it can take a few days too in some cases if new pipelines are being installed in a house. The contractor will test the piping system after its installation and should also guarantee availability in case of any leakage or failure. You should also check if your requirements are met after the installation. If there is any flaw, you should get it fixed right away.

Prestige Plastics is a piping company in Lahore providing quality HDPE pipes and CPVC pipes in Pakistan and pipes in Lahore. Different sizes and diameters of HDPE pipes and fittings & CPVC pipes and fittings that need to be applied in any kind of application are available at Prestige Plastics. At Prestige Plastics, we manufacture high-quality HDPE pipes and fittings and CPVC pipes and fittings that are designed to withstand the rigors of any project.

Contact us today to learn more about our products and how we can help you with your piping needs!

Scroll to Top

Become A Distributor